In this blog post, we'll guide you through swapping your standard motorcycle headlight to an LED headlight using our headlight mounting kit. This is a great way to upgrade your motorcycle's look and performance. Here's what you'll need:

  • Royal Enfield Interceptor 650, Continental GT, Triumph Thruxton, Triumph Bonneville (or similar motorcycle)
  • Our LED headlight mounting kit
  • Our LED headlight

Benefits of Upgrading to an LED Headlight

  • Brighter light output
  • Lower power consumption
  • Longer lifespan
  • More modern look

Step-by-Step Guide

  1. Remove the Factory Headlight

  • Disconnect the headlight from the motorcycle's electrical system.
  • Remove the headlight housing from the motorcycle.
  • On some motorcycles, you may need to remove the handlebars and top triple clamp bracket to access the factory headlight mounts.
  1. Reroute Cables (if necessary)

  • If your motorcycle has a large headlight housing, you may need to reroute some cables to make room for the new LED headlight.
  • You can disconnect the cables from the headlight bucket and reroute them underneath the tank.

Install the Headlight Mounting Kit

  • Our headlight mounting kit comes with four handlebar clamps that bolt directly onto your forks.
  • The clamps are depth adjustable, so you can position your headlight at the perfect height.
  • Use the included rubber strips to protect your fork crown from scratches.

Mount the LED Headlight

  • Once the headlight mounting kit is installed, you can mount the new LED headlight.
  • The headlight is depth adjustable, so you can fine-tune the position after it's mounted.

Connect the Wiring

  • The headlight mounting kit should come with instructions on how to connect the wiring for your specific motorcycle.
  • In general, you will need to connect the high beam, low beam, and ground wires.

Test the Headlight

  • Once everything is wired up, turn on the motorcycle and test the headlight.
  • Make sure the high beam and low beam are functioning properly.

Additional Tips

  • If you are having trouble connecting the wiring, consult the included instructions or scan the QR code on the packaging for an in-depth guide.
  • Be careful not to damage the cables when you are rerouting them.
  • Make sure to tighten all of the bolts and screws securely.

Upgrading your motorcycle headlight to an LED headlight is a great way to improve your visibility and overall look of your front end. With our headlight mounting kit, the installation process is quick and easy. By following the steps in this blog post, you can have your new LED headlight installed in no time so you can get back to the best part of motorcycles, riding them.

Вернуться к блогу

Комментировать

Обратите внимание, что комментарии проходят одобрение перед публикацией.

Purpose Built Moto is home for unique custom motorcycle builds. We offer a unique motorcycle customizing experience in the heart of the Gold Coast.